SPE-SWJ12 Desktop/Wall Double Fixed Rotating Screen Mesh Rack

This rack is mainly used for placing various sizes mesh in roll (with paper tube) .It can guarantee the mesh to be clean, put in order,and it is easy to clip, the operating is simpler, convenient to use.

This rack is suitable for the merchant to sell mesh or use many rolls mesh , it can be used for retailing mesh, and it also can be used on the screen stretcher to make plate.

According to mesh number , quantity of each roll and weight. Each rack can install 6-12 rolls. At first user needs to confirm the mesh number, then rotate both sides disk to suitable location. Tighten the positioning screws of both sides to fix the disc,user can cut mesh and stretch mesh.

1.Installation method:

It can be fixed directly on the desktop or the wall.

It can be fixed on the desk by bolts or screws. It can be fixed on the wall by wall hook or screws.

Installation positions of both sides are based on the length of the mesh in roll, then add 4cm as the installation distance.

If place the 1.63 meter width mesh, length of the tube is 1.67 meter; The installation distance is 1.75 meter.

2.Using methods:

Tighten the 12 screws of one disc; Loosen the screws of the other disk, put the mesh into the long screws on both sides, and tighten the screws.

When using the mesh, rotate the disc to the right position, tighten the screws on both sides to the circular hole on the corresponding disk ,then fix them.