006446 N662L?lift?frame?standing?sitting?double?operation?precision?fine?
tuning?six?color?six?station?double?wheel??screen?printing?machine
It is mainly used for the six color T-shirt overprinting,it is configured with
six screen frame chucks and six t-shirt pallet stations;
1,Both the pallet part and the screen frame part can rotate independently
at 360 degree;Users can operate at any station;
The chuck of the screen frame can rotate at 360 degree.
2,Each screen frame arm is installed with 3 knobs to fine-tune the screen plate, screen plate
directly fixed on the clamp, loosen the upper two fixed handle on thepallet arm ,
adjusting the screen frame back and forward, left and right within 15 mm by the three
fine-tuning knobs. When the screen plate color alignment is finished,
the upper two fixed handle on the pallet arm can be tightened.
3,Users can finish all the screen frame’s overprinting positioning at any pallet station,
All the screen frames’position is correct to any one pallet , the other one pallet will be correct ,
then the user can start overprinting.There is no need to correct the position of every pallet.
4,The machine adopts adjustable height rack; The height of the rack can be adjusted
according to the operator's height and working habits; The adjustment range
from the ground is 58-109 cm ;The operator can work by standing or sitting on
a chair according to the height of therack.
5,Each screen frame’s fixing device is equipped wth precise positioning wheel,when the
positioning iron on the arm placed in positioning wheel closely,
it can ensure the printing precision .
6,Each screen frame’s fixing device is equipped wth big lock wheel, screen frame arm
can easily fall into the metal positioning wheel when touch the two big lock
wheels ,and it also can prevent the direct collision between the positioning
iron and the metal positioning wheel .
7,According to the weight of the screen frame, spring
tension can be adjusted by the basket screws to achieve balance;
8,Screen frame chuck’s width is (10in) 25 cm ; It is suitable for screen frame
with outside size within (24 in) 60 cm and screen frame with
thickness size is within 4 cm (1.6 in) ;
9, Screen frame chuck can be adjusted up to 5 cm (2 in)according
to the height of substrates;
10, Screen frame chuck knob fix the screen frame together with the special
aluminum alloy plate, and it can be fit closely and be more stable;
11,T-shirt type pallet of the machine is 55 cm (22 in) long, 45 cm(18in) wide,
the thickness is 1.8 cm (0.7 in); Using furniture surface melamine high
density board, the surface with small pits, and it is more suitable for printing
T-shirt when scraping the pallet glue.
12,This shelf can adjust five height ranges according to height requirements;
13,The diameter of the lowest acljusting height of this shelf is 95 cm,and the diameter of the highest adjusting height is 135 cm;
14,When this shelf wants to move, it can raise four supporting feet,so that the wheel lands, it can be pushed to move.